TS700-E7/RS8
6-33
Chapter 6
6.3.7 Setting the Boot array in the BIOS Setup Utility
multi-RAID using the Intel
®
Rapid Storage Technology.
To set the boot array in the BIOS:
Set at least one of the arrays bootable to boot from the hard disk.
1. Reboot the system and press <Del> to enter the BIOS setup utility during
POST.
2. Go to the Boot menu and select the boot option priority.
3. Use up/down arrow keys to select the boot priority and press <Enter>. See
section 4.7 Boot menu for details.
4. From the Exit menu, select Save Changes & Exit, then press <Enter>.
Yes, then press <Enter>.
Comentarios a estos manuales