Asus RS162-E4/RX4 Manual de usuario Pagina 118

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 164
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 117
Chapter 6: RAID conguration
6-6
5. The Create New Array screen shows the disks you can add to make up
the IM volume. Use the arrow key to select a disk, then move the cursor
to the RAID Disk column. To include this disk in the array, press <+>, <->,
or <Space>.
You may also specify the Hot Spare disk here. Select the disk, then
move the cursor to the Hot Spr column, then press <+>, <->, or
<Space>.
6. A conrmation screen appears.
Press <M> to keep existing data on the first disk. If you choose this
option, data on the rst disk will be mirrored on the second disk that
you will add to the volume later. Make sure the data you want to mirror
is on the rst disk.
Press <D> to overwrite any data and create the new IM array.
By default, the RAID Disk eld shows No before array creation. This
eld is grayed out under the following conditions:
The disk does not meet the minimum requirements for use in a RAID
array.
The disk is not large enough to mirror existing data on the primary
drive.
The disk has been selected as the Hot Spare for the RAID array.
The disk is already part of another array.
Vista de pagina 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 163 164

Comentarios a estos manuales

Sin comentarios