Asus DS300f Especificaciones descargar pdf (Pagina 187)

DS300f G2 Series User Manual

181

InStallInG the new controller

To install the new RAID controller:

1. Carefully slide the RAID controller into the enclosure.

2. Gently swing the handle in and press the handle until it locks.

3. Reconnect all cables that were attached to the RAID controller.

• Fibre Channel cables

• iSCSI cables

• SAS expansion cables

• Management port cables

• Serial cable

• UPS control cable

If one of the controllers goes into maintenance mode, see "Maintenance Mode" on page <?>.

replaCInG a raId Controller – sInGle

Controller

The RAID controller monitors and manages the logical drives. When the RAID controller is replaced, all of your

logicaldrivedataandcongurationsremainintactbecauselogicaldriveinformationisstoredonthephysical

drives.

Caution

The RAID controller is NOT hot-swappable if your ASUS DS300f G2 has only one con-

troller. Power-down the ASUS DS300f G2 before removing it.

Important

Do not replace the RAID controller based on LED colors alone. Only replace the RAID

controller when directed to do so by ASUS Storage Technical Support. See page 435.

Important

ThermwareonthereplacementRAIDcontrollermustbethesameversionasthe

original RAID controller or a later version.

The amount of SDRAM in the replacement RAID controller must be the same as the

original RAID controller or greater.

ToobtainrmwareandSDRAMinformationforthecurrentlyinstalledRAIDcontroller,click

the Administration button then click the Image Version icon.

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 261 262

Sin comentarios

Asus DS300f Especificaciones Pagina 187