Asus TR-DLSR Manual de usuario Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 100
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
32
3. HARDWARE SETUP
ASUS TR-DLSR Users Manual
3. H/W SETUP
Connectors
6) Two 68-pin Ultra160 SCSI Connectors (SCSI-A, SCSI-B)
This motherboard has two 68-Pin Ultra160 SCSI connectors; one for each of the
two channels. Each channel can support a maximum of 15 devices as specified
by Ultra160 standards.
SCSI Connection Notes
This motherboard has two 68-Pin Ultra160 SCSI connectors; one for each of the
two channels.
The onboard SCSI chipset incorporates an advanced multimode I/O cell that supports
both single-ended (SE), Ultra2, and Ultra160 devices. With Ultra160 devices, the
SCSI bus platform performs at full Ultra160 speeds (up to 160MB/sec) and extended
cabling 12m (or 25m in a point-to-point configuration). When an SE device is
attached, the bus defaults to an SE speed and 1.5m cable length.
IMPORTANT: Connect SCSI devices as shown. Each channel should have only
one type of SCSI standard (e.g. Ultra160, Ultra2, Ultra-Wide). Mixing SCSI devices
on the same channel decreases performance of the slower device.
NOTE: Ultra160 SCSI devices do not have termination jumpers and must
use a separate terminator on the last connector (internal) or device (external).
TR-DLSR
TR-DLSR Onboard SCSI Connectors
3568
34 1
35
6834
1
SCSI-A (Internal)
68-Pin Ultra160/Ultra2-Wide SCSI Connector
SCSI-B (External)
68-Pin Ultra160/
Ultra2-Wide SCSI Connector
TR-DLSR
TR-DLSR SCSI Connection Example
68-pin Internal SCSI Cable (Twisted-Pair Ribbon)
68-pin Female
Terminator
Internal SCSI Devices (up to 15 devices)
Channel A
68-pin Internal SCSI Cable (Twisted-Pair Ribbon)
68-pin Female
Terminator
Internal SCSI Devices (up to 15 devices)
Channel B
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 99 100

Comentarios a estos manuales

Sin comentarios