Asus TR-DLSR Manual de usuario descargar pdf (Pagina 30)

3. HARDWARE SETUP

ASUS TR-DLSR User’s Manual

3. H/W SETUP

Connectors

2) IDE/SCSI Activity LED (2-pin IDELED)

This connector supplies power to the chassis activity LED. Read and write activity

by devices connected to the primary/secondary IDE and SCSI connectors cause

the LED to light up.

NOTE: Another 2-pin IDE LED connector is available in the connector

labeled PANEL.

TR-DLSR

TR-DLSR IDE Activity LED

*Same as the “HDD Access

LED” in the panel connectors

IDELED

3) Floppy Disk Drive Connector (34-1 pin FLOPPY)

This connector supports the provided floppy drive ribbon cable. After connecting

the single end to the board, connect the two plugs on the other end to the floppy

drives. (Pin 5 is removed to prevent inserting in the wrong orientation when

using ribbon cables with pin 5 plugged).

TR-DLSR

NOTE: Orient the red markings on

the floppy ribbon cable to PIN 1.

TR-DLSR Floppy Disk Drive Connector

PIN 1

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 99 100

Sin comentarios

Asus TR-DLSR Manual de usuario Pagina 30