Asus RS700-E8-RS4 e9961b Manual de usuario Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 198
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
2-13
ASUS RS700-E8-RS4 Series
2.3.4 Removing a DIMM
1. Simultaneously press the retaining
clipsoutwardtounlocktheDIMM.
2. RemovetheDIMMfromthesocket.
2.3.3 Installing a DIMM
3. HoldtheDIMMbybothofitsends
theninserttheDIMMverticallyinto
the socket. Apply force to both ends
oftheDIMMsimultaneouslyuntilthe
retaining clips snaps back into place.
EnsurethattheDIMMissittingrmly
ontheDIMMslot.
EnsuretounplugthepowersupplybeforeaddingorremovingDIMMsorothersystem
components. Failure to do so may cause severe damage to both the motherboard and the
components.
1. UnlockaDIMMsocketbypressing
the retaining clips outward.
2. AlignaDIMMonthesocketsuchthat
thenotchontheDIMMmatchesthe
DIMMslotkeyonthesocket.
ADIMMiskeyedwithanotchsothatittsinonlyonedirection.DONOTforceaDIMMinto
asocketinthewrongdirectiontoavoiddamagingtheDIMM.
SupporttheDIMMlightlywithyourngerswhenpressingtheretainingclips.TheDIMM
mightgetdamagedwhenitipsoutwithextraforce.
AlwaysinserttheDIMMintothesocketVERTICALLYtopreventDIMMnotchdamage.
Locked Retaining Clip
Unlocked retaining clip
DIMM notch
DIMM slot key
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 197 198

Comentarios a estos manuales

Sin comentarios