Asus ASMB6-IKVM Guía de usuario descargar pdf (Pagina 55)

3-3ASUS ESC4000 G2 Series

3.1.2 Attaching the rack rails

To attach the rack rails

1. Place the two front rail rack joints into the rear rail rack slots, as shown in the

following gure.

2. Attach the front and rear rail racks with eight screws and nuts, as shown in

the following gure. Do not secure the screws too tight so that you can still

adjust the length of the rack rails to meet the depth of the server rack.

Front rail rackRear rail rack

Frontrailrackjoints

Rear rail rack slots

7. Secure the front end of the rail with

two rack screws, as shown in the

right gure.

8. Secure the rear end of the rail with

two rack screws, as shown in the

right gure.

9. Fasten the eight screw you secure

in step 2, as shown in the right

gure.

10. Repeat steps 6 to 9 to assemble

and attach the rack rail on the other

side.

3. Select two units of space (2U) on the rack where you want to install the

barebone server.

4. Measure the depth of the rack to determine the length of the rack rails.

5. Adjust the rack rail to ensure that it ts the rack.

6. Position the rack rail to the 2U space on the rack. Ensure that the front end of

the rack rail goes to the front of the rack space.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 199 200

Sin comentarios

Asus ASMB6-IKVM Guía de usuario Pagina 55