Asus P8C WS Manual de usuario descargar pdf (Pagina 36)

2-18

Chapter 2: Hardware information

Chapter 2

2. Intel

C216 Serial ATA 3.0 Gb/s connectors

(7-pin SATA3G_3–6 [blue])

These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical disc

drives via Serial ATA 3.0 Gb/s signal cables.

If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10

conguration with the Intel

Rapid Storage Technology through the onboard Intel

C216

chipset.

• These connectors are set to [IDE Mode] by default. If you intend to create a Serial

ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID

Mode]. Refer to section 3.5.4 SATA Conguration for details.

• Before creating a RAID set, refer to section

4.5 RAID congurations or the manual

bundled in the motherboard support DVD.

• When using hot-plug and NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer

to section 3.5.4 SATA Conguration for details.

• You must install Windows

XP Service Pack 3 or later versions before using Serial

ATA hard disk drives. The Serial ATA RAID feature is available only if you are using

Windows

XP SP3 or later versions.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 139 140

Sin comentarios

Asus P8C WS Manual de usuario Pagina 36