2-22 Chapter 2: Hardware information
6. VGA graphics controller setting (3-pin VGA_EN1)
This jumper allows you to enable or disable the onboard ATI Rage XL
video graphics controller. Set to pins 1-2 to enable the video graphics
controller.
Make sure to set this jumper to Disable if you want to install VGA cards
on the PCI and PCI Express slots.
7. RAID select setting (3-pin RAID_SEL1)
Set this jumper to 1-2 (Default) to enable LSI RAID ROM. Set this
jumper to 2-3 to enable Intel
®
RAID ROM.
Comentarios a estos manuales