Asus NCL-DS1R1 Manual de usuario descargar pdf (Pagina 41)

ASUS NCL-DS1 SeriesASUS NCL-DS1 Series

ASUS NCL-DS1 Series

2-212-21

2-21

Except when clearing the RTC RAM, never remove the cap on CLRTC

jumper default position. Removing the cap will cause system boot failure!

2.6 Jumpers

The grayed out components in the illustrations may not be present in

certain models.

1.1.

Clear RTC RAM (CLRTC1)Clear RTC RAM (CLRTC1)

Clear RTC RAM (CLRTC1)

This jumper allows you to clear the Real Time Clock (RTC) RAM in

CMOS. You can clear the CMOS memory of date, time, and system

setup parameters by erasing the CMOS RTC RAM data. The onboard

button cell battery powers the RAM data in CMOS, which include

system setup information such as system passwords.

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Remove the onboard battery.

3. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the

cap on pins 2-3 for about 5~10 seconds, then move the cap back

to pins 1-2.

4. Re-install the battery.

5. Plug the power cord and turn ON the computer.

6. Hold down the <Del> key during the boot process and enter BIOS

setup to re-enter data.

NCL-DS1 Series Clear RTC RAM

CLRTC1

Normal

(Default)

Clear CMOS

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 107 108

Sin comentarios

Asus NCL-DS1R1 Manual de usuario Pagina 41