Asus KFN5-Q/SAS Manual de usuario Pagina 110

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 175
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 109
ASUS KFN5-Q Series 5-3
5.2 NVIDIA
®
RAIDcongurations
The motherboard includes a high performance SATA RAID controller
integrated in the NVIDIA
®
MCP55 Professional chip. The RAID controller
supports RAID 0, RAID 1, RAID 0+1, RAID 5, and JBOD congurations using
the six Serial ATA ports.
5.2.1 Setting the BIOS RAID items
After installing the hard disk drives, make sure to set the necessary RAID
items in the BIOS before setting your RAID conguration.
To set the BIOS RAID items:
1. Enter the BIOS Setup during POST.
2. Go to the
Main Menu, select IDE Conguration, then press <Enter>.
3. Set the
nVidia RAID Option ROM item to [Enabled], then press
<Enter>. The master and slave drive list appears.
4. Enable the drives you want to set as RAID.
5. Save your changes, then exit the BIOS Setup.
Refer to Chapter 4 for details on entering and navigating through
the BIOS Setup.
The RAID BIOS setup screens shown in this section are for reference
only, and may not exactly match the items on your screen.
5.1.3 RAID configuration utility
Depending on the RAID connectors that you use, you can create a RAID set
using the utilities embedded in each RAID controller. For example, you may
use the LSI1068 SAS Conguration Utility if you installed SAS hard disk
drives to the mini-SAS connector(s) supported by the LSI1068 PCI-X SAS
controller.
Refer to the succeeding sections for details on how to use each RAID
conguration utility.
Vista de pagina 109
1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 174 175

Comentarios a estos manuales

Sin comentarios