Asus AP1710-E1 Manual de usuario descargar pdf (Pagina 30)

Chapter 2: Hardware setupChapter 2: Hardware setup

Chapter 2: Hardware setup

2-62-6

2-6

2. Position the CPU above the

socket as shown.

3. Carefully insert the CPU into the

socket until it fits in place.

The CPU fits only in one

correct orientation. DO NOT

force the CPU into the socket

to prevent bending the pins

and damaging the CPU!

4. Carefully push down the socket

lever to secure the CPU. The

lever clicks on the side tab to

indicate that it is locked.

5. Apply the thermal interface

material (thermal grease) to the

top of the CPU. This thermal

grease should come with the CPU

package.

6. Repeat steps 1 to 5 to install a

second CPU.

Marked cornerMarked corner

Marked corner

(gold arrow)(gold arrow)

(gold arrow)

To install a CPU:

1. Locate the 604-pin ZIF sockets

on the motherboard. Flip up the

socket lever and push it all the

way to the other side.

Make sure that the socket

lever is pushed back all the

way; otherwise the CPU does

not fit in completely.

Socket for CPU1

Incorrect installation of the CPU into the socket may bend the pins and

severely damage the CPU!

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 157 158

Sin comentarios

Asus AP1710-E1 Manual de usuario Pagina 30