Asus AP1600R-E2(AI2) Manual de usuario Pagina 117

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 150
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 116
6-36-3
6-36-3
6-3
ASUS AP1600R-E2 (AA2/AI2)ASUS AP1600R-E2 (AA2/AI2)
ASUS AP1600R-E2 (AA2/AI2)ASUS AP1600R-E2 (AA2/AI2)
ASUS AP1600R-E2 (AA2/AI2)
6.1.36.1.3
6.1.36.1.3
6.1.3
Setting the RAID item in BIOSSetting the RAID item in BIOS
Setting the RAID item in BIOSSetting the RAID item in BIOS
Setting the RAID item in BIOS
You must set the RAID item in the BIOS Setup before you can create a RAID
set(s). To do this:
1. Enter the BIOS Setup during POST.
2. Go to the
Advanced MenuAdvanced Menu
Advanced MenuAdvanced Menu
Advanced Menu, select
Onboard deviceOnboard device
Onboard deviceOnboard device
Onboard device, then press
<Enter>.
3. Select the item
SATA ConfigurationSATA Configuration
SATA ConfigurationSATA Configuration
SATA Configuration, then press <Enter> to display
the configuration options.
4. Select
RAID RAID
RAID RAID
RAID from the
SATA Mode SATA Mode
SATA Mode SATA Mode
SATA Mode options, then press <Enter>.
5. Save your changes, then exit the BIOS Setup.
Refer to the BIOS setup for details on configuring the BIOS.
6.1.46.1.4
6.1.46.1.4
6.1.4
RAID configuration utilityRAID configuration utility
RAID configuration utilityRAID configuration utility
RAID configuration utility
You can create a RAID set using the utility embedded in the RAID
controller. For example, you can use the
Adaptec RAID ConfigurationAdaptec RAID Configuration
Adaptec RAID ConfigurationAdaptec RAID Configuration
Adaptec RAID Configuration
Utility Utility
Utility Utility
Utility if you installed SATA hard disk drives on the SATA connectors
supported by the Intel
®
6300ESB Southbridge.
The Adaptec RAID Configuration Utility allows you to create RAID 0 and
RAID 1 set using the SATA hard disk drives connected to the SATA
connectors supported by the motherboard Southbridge chip.
To enter the Adaptec RAID Configuration Utility:
1. Turn on the system after installing all the SATA hard disk drives.
2. During POST, the Adaptec HostRAID™ technology automatically
detects the installed SATA hard disk drives and displays any existing
RAID set(s). Press <Ctrl> <A> to enter the utility.
Vista de pagina 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 149 150

Comentarios a estos manuales

Sin comentarios